Stabilization of Leidenfrost vapour layer by textured superhydrophobic surfaces
VAKARELSKI I, PATANKAR N, [...], Nature, [MountainsMap]
[PDF] Measuring crystallization pressure: can Correns' experiment be repeated?
CARUSO F, FLATT R J, 12th Int Congress on Deterioration and Conservation of Stone, Columbia Univ, NY, [SensoMap]
Synthesis and characterization of CdSe/ZnS core-shell quantum dots immobilized on solid substrates through laser irradiation
GYÖRGY E, PEREZ DEL PINO A, ROQUETA J, BALLESTEROS B, MIGUEL A S, MAYCOCK C, OLIVA A G, Applications and Materials Science, 209(11), 2201-2207, [MountainsMap]
A methodology and new criteria to quantify the adhesive and abrasive wear damage on a die radius using white light profilometry
LE ROUX S, BOHER C, PENAZZI L, DESSAIN C, TAVERNIER B, Tribology Int., 52, 40-49, [Altimap]
In Situ Attenuated Total Reflection (ATR/FT-IR) Tribometry: A Powerful Tool for Investigating Tribochemistry at the Lubricant-Substrate Interface
MANGOLINI F, ROSSI A, SPENCER N D, Tribology Letters, 45(1), 207-218, [SensoMap]
Nonvisual Defect Inspection Service Offered to Semiconductor Manufacturers
J of Failure Analysis and Prevention, 12(2), 155-156, [LeicaMap]
Construction of glycoprotein multilayers using the layer-by-layer assembly technique
WANG B, LIU Z, XU Y, [...], J of Mater. Chem., 22:17954-17960, [PicoImage]
Orthogonal nanometer-micrometer roughness gradients probe morphological influences on cell behavior
ZINK C, HALL H, BRUNETTE D M, SPENCER N D, Biomaterials, 33(32), 8055-8061, [SensoMap]
Advances in Metrology for X-Ray and EUV Optics
ASSOUFID L, TAKACS P Z, ASUNDI A K, Proc. SPIE, Front Matter, 8501, [MountainsMap]
Osteoblast viability on hydroxyapatite with well-adjusted submicron and micron surface roughness as monitored by the proliferation reagent WST-1
GROSSE HOLTHAUS M, TRECCANI L, REZWAN K, J of Biomaterials Applications, 27(7), 791-800, [SensoMap]
A Step-by-Step Analysis of Manual Polishing Sequences
LEITNER H, KRANZ R, TREMMEL A, 9th Int. Tooling Conf., 317-324, [MountainsMap]
Structural rearrangements and chemical modifications in known cell penetrating peptide strongly enhance DNA delivery efficiency
RAJPAL, MANN A, KHANDURI R, NAIK R J, GANGULI M, J of Controlled Release, 157(2):260-271, [PicoImage]
Systematic Study of the Structure-Property Relationships of Branched Hierarchical TiO2/ZnO Nanostructures
ATHAUDA T J, NEFF J G, SUTHERLIN L, BUTT U, OZER R R, Appl. Mater Interfaces, 4(12), 6917-6926, [MountainsMap]
In Situ Formation of Hydroxyapatite Within Gelatin Based Copolymer Hydrogel Prepared by Ionizing Radiation
EL-HAG A, J of Macromolecular Science, Part A: Pure and Applied Chemistry, 49(1):7-14, [PicoImage]
Areal texture and angle measurements of tilted surfaces using focus variation methods
HIERSEMENZEL F, PETZING J N, LEACH R K, HELMLI F, SINGH J, Loughborough Univ., [MountainsMap]
Advanced 3D laser microscopy for measurements and analysis of vitrified bonded abrasive tools
KAPLONEK W, NADOLNY K, J of Eng. Sci. and Tech., 7(6), 661-678, [Talymap]
Nanotechnology for forensic sciences: Analysis of PDMS replica of the case head of spent cartridges by optical microscopy, SEM and AFM for the ballistic identification of individual characteristic features of firearms
VALLE F, BIANCHI M, TORTORELLA S, PIERINI G, BISCARINI F, D'ELIA M, Forensic Science International, 222(1-3), 288-297, [MountainsMap]
New Multimode Sensors based on Nanostrucured Materials for Simultaneous Screening of Biological Fluids for Specific Breast Cancer and Hepatitis B Biomarkers
STEFAN-VAN STADEN R I, ENACHESCU M, Meet. Abstr. 2012 MA2012-02(56): 3836, [PicoImage]
Effect of surface orientation on dissolution rates and topography of CaF2
GODINHO J R A, PIAZOLO S, EVINS L Z, Geochimica et Cosmochimica Acta, 86, 392-403, [SensoMap]
Bone tissue response to BMP-2 adsorbed on amorphous microporous silica implants
CHAUDHARI A, CARDOSO M V, MARTENS J, [...], J of Clinical Periodontology, 39(12), 1206-1213, [MountainsMap]
Tailoring controlled-release oral dosage forms by combining inkjet and flexographic printing techniques
GENINA N, FORS D, VAKILI H, [...], European J of Pharmaceutical Sci., 47(3), 615-623, [MountainsMap]
Transition metal ion-substituted polyoxometalates entrapped in polypyrrole as an electrochemical sensor for hydrogen peroxide
ANWAR N, VAGIN M, LAFFIR F, Analyst, 137:624-630, [PicoImage]
Correlating motif analysis and morphological filters for surface texture analysis
LOU S, JIANG XQ, SCOTT P J, Measurement, 46(2), 993-1001, [MountainsMap]
Surface roughness enhances the osseointegration of titanium headposts in non-human primates
HACKING S A, BOYRAZ P, POWERS B M, SEN-GUPTA E, KUCHARSKI W, BROWN C A, COOK E P, J of Neuroscience method, 211(2), 237-244
Optical analysis of orange peel on metallic surfaces
MIRANDA-MEDINA M L, WAGNER T, BÖHM J A, VERNES A, HINGERL K, Proc SPIE 8430 Optical micro- and nanotechnology, [MountainsMap]
Oxidation of DNA followed by conformational change after OH radical attack
NOWICKA A, KOWALCZYK A, SEK S, STOJEK Z, Analytical chemistry, 85(1):355-361
Single-molecule force spectroscopy studies on intra- and intermolecular interactions of G-quadruplex aptamer with target Shp2 protein
ZHAO X-Q, WU J, LIANG J-H, [...], J. of Physical Chemistry B, 116(37):11397-11404
High resolution morphology and electrical characterization of aged Li-ion battery cathode
RAMDON S, BHUSHAN B, J. of colloid and interface science, 380(1):187-191
Ultrastructural characterization of cystic fibrosis sputum using atomic force and scanning electron microscopy
MANZENREITER R, KIENBERGER F, MARCOS V, [...], J. of Cystic fibrosis, 11:2:84-92
Characterization of aqueous extract of the root of Aristolochia indica: evaluation of its traditional use as an antidote for snake bites
BHATTACHARJEE P, BHATTACHARYYA D, J. of Ethnophamacology, 145(1):220-226
Controlling morphology of peptide-based soft structures by covalent modifications
GOUR N, BARMAN A K, VERMA S, J. Peptide Science, 18(6):405-412
Experimental study on asperity evolution of joint surfaces
FAN X, CAO P, JIN J, http://www.paper.edu.cn/en_releasepaper/content/4461204
The experimental and numerical analysis of quasi-steady wear process for a sliding spherical indenter
PACZELT I, KUCHARSKI S, MROZ Z, Wear, 254:275:127-148
Correlation between standard roughness parameters skewness and kurtosis and tribological behavior of contact surfaces
SEDLACEK M, PODGORNIK B, VIZINTIN J, Tribology International, 48:102-112
Planning surface texturing for reduced friction in lubricated sliding using surface roughness parameters skewness and kurtosis
SEDLACEK M, PODGORNIK B, VIZINTIN J, , J. of Eng. Tribology, 226:661-667
Effect of surface topography in the generation of chemical maps by laser-induced plasma spectroscopy
LOPEZ-QUINTAS I, PINON V, MATEO M P, NICOLAS G, Applied Surface Science, 258(23), 9432-9436, [SensoMap]
Morphology characteristics of joint surface in rock mass
HU J B, RUAN D X, LUO X W, ZHOU K P, J. Cent South Univ. of Tech, 19(10):2918-2925, [Talymap]
Using MountainsMap (Digital Surf) surface analysis software as an analysis tool for x-ray mirror optical metrology data
DUFFY A, YATES B, TAKACS P, Proc. SPIE 8501, Adv. X-ray and EUV Optics, San Diego, [MountainsMap]
Confocal laser scanning microscopy for characterization of surface microdiscontinuities of vitrified bonded abrasive tools
NADOLNY K, KAPLONEK W, Int. J. Mech. Eng. & Rob. Res.
Geometrical transcription of diamond electroplated tool in ultrasonic vibration assisted grinding of steel
ISMAIL M F, YANAGI K, ISOBE H, Int. J. Mach. Tools and Manuf., [MountainsMap]
Teasing apart the contribution of hard dietary items on 3D dental microtextures in primates
CALANDRA I, SCHULZ E, PINNOW M, KROHN S, KAISER T M, J. Human Evolution, 63(1), 85-98, [MountainsMap]
Response of Osteoclasts to Titanium Surfaces with Increasing Surface Roughness: An In Vitro Study
BRINKMANN J, HEFTI T, SCHLOTTIG F, SPENCER N D, HALL H, BioInterPhases, 7(34), [SensoMap]
Tribochemistry of Triphenyl Phosphorothionate (TPPT) by In Situ Attenuated Total Reflection (ATR/FT-IR) Tribometry
MANGOLINI F, ROSSI A, SPENCER N D, J of Phys. Chem., 116(9), 5614-5627, [SensoMap]
Epitaxial BaZrO3 tracks by electrospinning of metalorganic fibers on single crystals
CALLEJA A, RICART S, GRANADOS X, PALMER X, SOLANO E, TORNERO J A, CANO F, PUIG T, OBRADORS X, CrystEngComm, 14, 4686-4691, [MountainsMap]
Calibration of the scales of areal surface topography measuring instruments: part 2. Amplification, linearity and squareness
GIUSCA C, LEACH R K, HELARY F, Mea. Sci. Technol., 23, 065005, [MountainsMap]
Calibration of the scales of areal surface topography measuring instruments: part 1. Measurement noise and residual flatness
GIUSCA C, LEACH R K, HELARY F, GUTAUSKAS T, NIMISHAKAVI L, Mea. Sci. Technol., 23, 035008, [MountainsMap]
Area-based optical 2.5D sensors of a nanopositioning and nanomeasuring machine
MACHLEIDT T, SPARRER E, MANSKE E, KAPUSI D, FRANKE K-H, Mea. Sci. Technol., 23, 074010, [MountainsMap]
Interplay between Sb flux and growth temperature during the formation of GaSb islands on GaP
EL KAZZI S, DESPLANQUE L, WALLART X, WANG Y, RUTERANA P, J. of Applied Physics, 11, 12506-1
Surface morphology and wettability of sandblasted PEEK and its composites
OURAHMOUNE R, SALVIA M, MATHIA T G, MESRATI N, Scanning, Wiley
Micromachining of ceramic surfaces: Hydroxyapatite and zirconia
GROSSE HOLTHAUS M, TWARDY S, STOLLE J, [...], J of Materials Proc. Tech., 212(3), 614-624, [SensoMap]
The effect of use duration on surface roughness measurement of stone tools
GIUSCA C L, EVANS A A, McDONALD D, LEACH R K, NPL report ENG 35
Deposition of functionalized single wall carbon nanotubes through matrix assisted pulsed laser evaporation
PEREZ DEL PINO A, GYÖRGY E, CABANA L, BALLESTEROS B, TOBIAS G, Carbon, [MountainsMap]
Three-dimensional characterization of surface texture for road stones undergoing simulated traffic wear
DUNFORD A M, PARRY A R, SHIPWAY P H, VINER H E, Wear, [MountainsMap]
Investigation of wheel wear mechanisms during grinding optical glasses through statistical analysis of wheel topography
YAO P, GONG Y, MATSUDA T, ZHOU T, YAN J, KURIYAGAWA T, Int. J. of Abrasive Technology, 5(1), 33-47, [MountainsMap]
A GaAs MEMS for AFM and spin injection
ARSCOTT S, PEYTAVIT E, DERESMES D, DARGENT T, VU D, ROWE A C H, PAGET D, Sensors and Actuators, 179, 10-16, [MountainsMap]
Aerosol emitted by the combustion of polymers containing nanoparticles
MOTZKUS C, CHIVAS-JOLY C, GUILLAUME E, DUCOURTIEUX S, SARAGOZA L, LESENECHAL D, MACE T, LOPEZ-CUESTAET J-M, LONGUET C, J. Nanoparticle Res., 14(3), 687
In Vitro Osteogenic Properties of Two Dental Implant Surfaces
MONJO M, PETZOLD C, RAMIS J M, [...], Int. J of Biomaterials, [SensoMap]
Influence of rapid mold temperature variation on surface topography replication and appearance of injection molded parts
LUCCHETTA G, FIOROTTO M, BARIANI P F, CIRP Annals - Manufacturing tech., 61, 539-542
Numerical study of the micro-formability of thin metallic materials: virtual micro-forming limit diagrams
SENE N, BALLAND P, ARRIEUX R, Archives of Civil and Mechanical Engineering, 11(2), 421-435, [Altimap]
Construction and Validation of a White Light Interferometer
SATHIAMOORTHY K, TANJIM A, Halmstad Univ. Master's Thesis, [MountainsMap]
High gloss polishing of tool steels - step by step
REBEGGIANI S, ROSEN B-G, Proc. 4th Int. Swedish Prod. Symp., 257-262, [MountainsMap]
Manufacture and characterization of free-standing epoxy-polyester films
70(4), 259-272, [Talymap]
[PDF] Corrosivity of Pongamia pinnata Biodiesel - Diesel Blends on a Few Industrial Metals
PARAMESH M H N, ANAND A, KRISHNAMURTHY S R, MANI S R, NACE 2011, [Altimap]
Stainless steel patterning by combination of micro-patterning and driven strain produced by plasma assisted nitriding
MARCOS G, GUILET S, CLEYMAND F, THIRIET T, CZEWIEC T, Surface an Coatings Technology, 205(2), S275-S279
Chemical Reactivity of Triphenyl Phosphorothionate (TPPT) with Iron: An ATR/FT-IR and XPS Investigation
MANGOLINI F, ROSSI A, SPENCER N D, J of Phys. Chem., 115(4), 1339-1354, [SensoMap]
The effect of electro-discharge machined sonotrode topology on interlaminar bonding in ultrasonic consolidation
EDMONDS H C, HARRIS R A, Proc SPIE 7978, Behavior and Mechanics of Multifunctional Materials and Composites, [Talymap]
Wear model simulating clinical abrasion on composite filling materials
JOHNSEN G F, TAXT-LAMOLLE S F, HAUGEN H J, Dental Materials J, 30(5), 739-748, [SensoMap]
Ultraviolet laser interference patterning of hydroxyapatite surfaces
BERGER J, GROSSE HOLTHAUS M, PISTILLO N, [...], Applied Surface Science, 257(7), 3081-3087, [SensoMap]
A method for visualization of surface texture anisotropy in different scales of observation
BERGLUND J, WIKLUND D, ROSEN B-G, Scanning, 33(5), 325-331, [MountainsMap]
The effect of fluoride surface modification of ceramic TiO2 on the surface properties and biological response of osteoblastic cells in vitro
TIAINEN H, MONJO M, KNYCHALA J, NILSEN O, [...], Biomedical Materials, 6(4), [SensoMap]
Influence of relative humidity on the nanoscopic topography and dielectric constant of thin film of PPy :PSS
SUN L, WANG J, BUTT H-J, BONACCURSO E, Small, 7(7):950-956, [MountainsMap]
Dissolution of fluorite type surfaces as analogues of spent nuclear fuel: Production of suitable analogues and study the effect of surface orientation on dissolution
GODINHO J, Stockholm Univ., [SensoMap]
Atomic force microscopy of microvillous cell surface dynamics at fixed and living alveolar type II cells
HECHT E, USMANI S M, ALBRECHT S, [...], Analytical and Bioanalytical Chemistry, 399(7):2369-2378, [PicoImage]
Spatio-temporal detachment of single cells using microarrayed transparent electrodes
FUKUDA J, AMEOKA Y, SUZUKI H, Biomaterials, 32(28):6663-6669
Analysis of profile measurement techniques employed to surfaces planed by an active machining system
ELMAS S, ISLAM N, JACKSON M R, PARKIN R M, Measurement, 44(2), 365-377, [Talymap]
Carbon nanotube-nucleobase hybrids: nanorings from uracil-modified single-walled carbon nanotubes
SINGH P, TOMA F M, KUMAR J, Chemistry - a European journal, 17(24):6772-6780
Cotinine reduces amyloid-β aggregation and improves memory in Alzheimer's disease mice
ECHEVERRIA V, ZEITLIN R, BURGESS S, PATEL S, [...], Int. J. of Alzheimer's disease, 24:4
[PDF] Effects of the technology of machining on the surface quality of selected wood
SVATOS M, KOPECKY Z, ROUSEK M, Acta Univ. Agriculturae et Silviculturae Mendelianae Brunensis, LIX(6), [Talymap]
Comparative Studies of Fracture Surfaces of a Biomaterial with the Use of a Profilographometer and Confocal Microscope
STACH S, Key Eng. Materials, 465, 271-275, [Talymap]
Advantages of Simultaneous Imaging Using an Atomic Force Microscope Integrated with an Inverted Light Microscope
JOHNSON T W, Microscopy Today, 19(6):22-29, [PicoImage]
Conjugated quantum dots inhibit the amyloid-β (1-42) fibrillation process
THAKUR G, MICIC M, YANG Y, LI D, [...], Int. J. of Alzheimer's disease, 502386
[PDF] Comparison of mechanical properties of CFRP laminate obtained from full-scale test and extrapolated from local measurement
VALACH J, KYTYR D, DOKTOR T, SEKYROVA K, KRALIK V NEMECEK J, Chem. Listy, 105, [Talymap]
Identification of wear process parameters in reciprocating ball-on-disc tests
KUCHARSKI S, MROZ Z, Tribology international, 44(2):154-164
Surface layer characteristics due to slide diamond burnishing with a cylindrical-ended tool
KORZYNSKI M, LUBAS J, SWIRAD S, DUDEK K, J. of Material Processing Technology, 211-84-94
Quantitative 3D profilometry and SEM analysis of the adaptation of root-end filling materials placed under an optical microscope
MUNHOZ M.F., MARCHESAN M.A., CARDOSO D.R.F., SILVA S.R.C., SILVA-SOUSA Y.T.C., SOUSA-NETO M.D., Int. Endodontic J., 44:560-566, [Talymap]
Properties of CoW alloy coatings electrodeposited from citrate electrolytes containing surface active substances
BOHANOVA Z.I., PETRENKO V.I., VOLODINA G.F., GRABKOET D.Z., DIKUSAR A.I., Surface Engineering and Applied Electrochemistry, 47(6), 493-503, [MountainsMap]
Characterization of worn cylinder liner surfaces by segmentation of honing and wear scratches
DIMKOVSKI Z., ANDERBERG C., OHLSSON R., ROSEN B.G., Wear, 271, 548-552, [MountainsMap]
Characterization of geometrical properties of electroplated diamond tools and estimation of its grinding performance
ISMAIL M.F., YANAGI K., ISOBE H., Wear, 271, 559-564, [MountainsMap]
Interference measurements of deposits on cylinder liner surfaces
DIMKOVSKI Z., BAATH L., OSEN S., OHLSSON R., ROSEN B.G., Wear, 270, 247-251, [MountainsMap]
A quantitative method to estimate high gloss polished tool steel surfaces
REBEGGIANI S., ROSEN B.G., SANDBERG A., J. of Physics: conf series, 311(1), [MountainsMap]
On linking customer requirements to surfaces - two industrial and engineering design case studies
ROSEN B.G., BERGMAN M., SKILLIUS H., ERIKSSON L., RAKE L., 13th Int. conf. Metrology and Properties of Engineering Surfaces, London, 131-135
The impact of manufacturing on automotive can/roller contact
CABANETTES F., LÖFGREN H.B., ROSEN B.G., 13th Int. conf. Metrology and Properties of Engineering Surfaces, London, 136-140
Influence of different cylinder liner surfaces on their performance with the twin land oil control ring in a car engine
DIMKOVSKI Z., ANDERBERG C., CABANETTES F., LÖFGREN H.B., ROSEN B.G., 13th Int. conf. Metrology and Properties of Engineering Surfaces, London, 146-150
Surface characterization based upon significant topographic features
BLANC J., GRIME D., BLATEYRON F., 13th Int. conf. Metrology and Properties of Engineering Surfaces, London, 249-253, [MountainsMap]
Effect of pulsed laser radiation on epitaxial self-assembled Ge quantum dots grown on Si substrates
PEREZ DEL PINO A., GYÖRGY E., MARCUS I.C., ROQUETA J., ALONSO M.I., , IOP Publishing, Nanotechnology 22, [MountainsMap]
Statistical approach to the description of random pyramid surfaces using 3D surface profiles
WEFRINGHAUS E., KESNAR C., LÖHMANN, Energy Procedia, 8, 135-140, [MountainsMap]
Intelligent Thermoresponsive Substrate from Modified Overhead Projection Sheet as a Tool for Construction and Support of Cell Sheets In Vitro
NITHYA J, KUMAR A, TILAK P LEENA J, SREENIVASAN K, KUMARY T V, Tissue Eng. Methods, 17(2), 181-191, [Talymap]
Does texturing of UHMWPE increase strength and toughness? A pilot study
ADDIEGO F., BUCHHEIT O., RUCH D., DAHOUN S.A., Clinical orthopaedics and related research, 469(8), 2318-2326
3D surface characterization for friction control
GRÖGER S., GERLACH M., Proc Eng. 19, 112-117
The role of the substrate in micro-scale scratching of epoxy-polyester films
BARLETTA M, GISARIO A, Applied Surface Science, 257(9), 4449-4463, [Talymap]
Multi-technique investigation of calcium hydroxide crystals at the concrete surface
GUEIT E., DARQUE-CERETTI E., TINTILLIER P., HORGNIES M., WIT Trans. Eng. Sci., 72, [MountainsMap]
Synthesis and Laser Immobilization onto Solid Substrates of CdSe/ZnS Core Shell Quantum Dots
GYÖRGY E., PEREZ DEL PINO A., ROQUETAT J., BALLESTEROS B., MIGUEL A.S., MAYCOCK C.D., OLIVA A.G., J. Phys. Chem. C, 115(31), 15210-15216, [MountainsMap]
Ultra fine line print process development for silicon solar cell metalisation
FALCON T., 18th Conf. Microelectronics Packaging, Weymouth, UK, [MountainsMap]
Bone Tissue Response to Porous and Functionalized Titanium and Silica Based Coatings
CHAUDHARI A., BRAEM A., VLEUGELS J., MARTENS J.A., NAERT I, PLoS ONE, 6(9), [MountainsMap]
Wood Machining Properties of Poplar Hybrid Clones from Different Sites Following Various Drying Treatments
HERNANDEZ R.E., CONSTANTINEAU S., FORTIN Y., Wood and Fiber Sci., 43(4), 394-411, [MountainsMap]
Boosting electrical conductivity in a gel-derived material by nanostructuring with trace carbon nanotubes
CANEVET D., PEREZ DEL PINO A., AMABILINO D.B., SALLE M., Nanoscale, 3(7), 2898-2902, [MountainsMap]
Adhesion and wear resistance of CVD diamond coatings on laser treated WC-Co substrates
BARLETTA M, RUBINO G, GISARIO A, Wear, 271(9-10), 2016-2024, [Talymap]
PLGA/hydrogel biopapers as a stackable substrate for printing HUVEC networks via BioLP
PIRLO R.K., WU P., LIU J., RINGEISEN B., Biotechnology and Bioengineering, 109(1), 262-273, [MountainsMap]
Characterization of aerosol emitted by the combustion of nanocomposites
MOTZKUS C., CHIVAS-JOLY C., GUILLAUME E., DUCOURTIEUX S., SARAGOZA L., LESENECHAL D., MACE T., J. Phys. Conf. Series, 304(1), 012020, [MountainsMap]
Assignment of values for a set of in-house developed verification masses using an inter laboratory comparison approach
JOSEPH L., VELAYUDHAN A., MURALEEDHARAN C.V., Int. J. Metrol. Qual. Eng. 2:5-11
Studies on current trends in the field of measurement and control of bearings
GHEORGHESCU D, The Romanian Review Prec. Mech., Optics & Mechatronics, 40, [Talymap]
3D finite element model of elastoplastic contact on the double sinus rough surface
HAGEGE B., BOUVIER S., MAZERAN P.E., BIGERELLE M., 13th Int. conf. Metrology and Properties of Engineering Surfaces, London, 45-49
Problems of surface topography with oil pockets analysis
GRABON W., PAWLUS P., GALDA L., DZIERWA A., PODULKA P., 13th Int. conf. Metrology and Properties of Engineering Surfaces, London, 76-81
[PDF] Roughness of interface in dry contact under fretting conditions
KUBIAK K.J., BIGERELLE M., MATHIA T.G., D'HARDIVILLIERS W., 13th Int. conf. Metrology and Properties of Engineering Surfaces, London, 99-102
Using areal parameters to improve electroless copper plating bond strength on glass substrate
HE B., PETZING J.N., WEBB D.P., CONWAY P.P., 13th Int. conf. Metrology and Properties of Engineering Surfaces, London, 108-112
High temperature tribological behaviour of tool steels during sliding against aluminium
VILASECA M, MOLAS S, CASELLAS D, Wear, 272(1), 105-109, [SensoMap]
Investigations of surface roughness influence on wear of pneumatic elements
RAGS D., LININS O., SMIRNOV S., 13th Int. conf. Metrology and Properties of Engineering Surfaces, London, 141-145
Development of measurement standards for verifying functional performance of surface texture measuring instruments
FUJII A., SUZUKI H., YANAGI K., 13th Int. conf. Metrology and Properties of Engineering Surfaces, London, 161-165
Calibration of the geometrical characteristics of areal surface topography measuring instruments
GIUSCA C.L., LEACH R.K., HELERY F., GUTAUSKA T., 13th Int. conf. Metrology and Properties of Engineering Surfaces, London, 177-181
Surface roughness analysis in milling of tungsten carbide with CBN cutters
TWARDOWSKI P., WIECZOROWSKI M., PAWLUS P., 13th Int. conf. Metrology and Properties of Engineering Surfaces, London, 254-258
Process parameter estimation based on the machined surface image
ZAWADA-TOMKIEWICZ A., 13th Int. conf. Metrology and Properties of Engineering Surfaces, London, 274-278
Adaptative measuring system for surface measurement
PIKSS M., KRIZBERGS J., 13th Int. conf. Metrology and Properties of Engineering Surfaces, London, 347-351
How a calculated model of sunscreen film geometry can explain in vitro and in vivo SPF variation
FERRERO L, PISSAVINI M, DOUCET O, Photochemical and Photobiological Sciences, 9, 540-551, [Altimap]
Optimization of cylinder liner surface finish by slide honing
DIMKOVSKI Z, CABANETTES F, LÖFGREN H, ANDERBERG C, OHLSSON R, ROSEN B-G, J of Eng. Manuf., 226(4), 575-584, [MountainsMap]
[PDF] Morphological criteria for micro tolerancing in manufacturing processes of assembly joints under fretting confitions
KUBIAK K J, MATHIA T G, CARRAS S, 10th Int. Symp. Meas. and Quality Control, [Altimap]
[PDF] A MATLAB Program to implement the band-pass method for discovering relevant scales in surface roughness measurement
AGUNWAMBA C, WPI, [MountainsMap]
Scratch resistance of fast-cured metal flake powder coatings
BELLISARIO D, BARLETTA M, UCCIARDELLO N, Progress in Organic Coatings, 68(1-2), 111-119, [Talymap]
Effect of acidic fluoride treatments on early enamel erosion lesions-A comparison of calcium and profilometric analyses
HJORTSJO C, JONSKI G, YONG A, SAXEGAARD E, Archives of Oral Biology, 55(3), 229-234, [SensoMap]
Nanosized particles of orlistat with enhanced in vitro dissolution rate and lipase inhibition
DOLENC A, GOVEDARICA B, DREU R, [...], Int. J of Pharmaceutics, 396(1-2):149-155
Development and characterisation of functionalised ceramic microtubes for bacteria filtration
KROLL S, TRECCANI L, REZWAN K, GRATHWOHL G, J of Membrane Science, 365(1-2), 447-455, [SensoMap]
Surface modification of Al-Al2O3 composites by laser treatment
CANNILLO V, SOLA A, BARLETTA M, GISARIO A, Optics and Laser in Engineering, 48(12), 1266-1277, [Talymap]
Carbon and diamond paste microelectrodes based on Mn(III) porphyrins for the determination of dopamine
BALASOIU S C, STEFAN-VAN STADEN R I, VAN STADEN J F, PRUNEANU S, RADU G L, Analytica Chimica Acta, 668(2):201-207, [PicoImage]
Wear resistance of nano- and micro-crystalline diamond coatings onto WC-Co with Cr/CrN interlayers
POLINI R, BARLETTA M, CRISTOFANILLI G, Thin Solid Film, 519(5), 1629-1635, [Talymap]
Biotin interaction with human erythrocytes: contact on membrane surface and formation of self-assembled fibrous structures
JOSHI K B, VENKATESH V, VERMA S, Chemical communications, 46:3890-3892
Porphyrins as molecular nanomaterials
FARAON V, ION R-M, POP S-F, VAN-STADEN R, VAN STADEN J-F, Proc. SPIE 7821, Adv. Topics on Optoelectronics, Microelectronics and Nanotechnologies
Self-assembled charged hydrogels control the alignment of filamentous actin
PARK J H, SUN Y, GOLDMAN Y E, COMPOSTO R J, Soft Matter, 6:915-921, [PicoImage]
On the effects of using CO2 and F2 lasers to modify the wettability of a polymeric biomaterial
WAUGH D G, LAWRENCE J, WALTON C D, ZAKARIA R B, Optics and Laser Technology, 42(2), 346-356, [Talymap]
HF-CVD of diamond coatings onto Fluidized Bed (FB) treated CrN interlayers
CRISTOFANILLI G, POLINI R, BARLETTA M, Thin Solid Film, 519(5), 1594-1599, [Talymap]
Study of fibre laser machining of C45 steel: influence of process parameters on material removal rate and roughness
GENNA S, LEONE C, LOPRESTO V, SANTO L, TROVALUSCI F, Int. J. Material Forming 3:1115-1118
Orientational ordering of solution derived epitaxial Gd-doped ceria nanowires induced by nanoscratching
ZABALETA J, MESTRES N, ABELLAN P, GIBERT M, SANDIUMENGE F, PUIG T, OBRADORS X, Nanotechnology, 21, [MountainsMap]
Evaluating corrosion inhibitors as a means to control MIC in produced water
BUSCH HARRIS J, WEBB R, JENNEMAN G, Corrosion 2010, San Antonio, TX
Milled die steel surface roughness correlation with steel sheet friction
BERGLUND J, BROWN C A, ROSEN B G, BAY N, CIRP Annals, Manufacturing Technology 59, 577-580, [MountainsMap]
Applying tribology to teeth of hoofed mammals
SCHULZ E, CALANDRA I, KAISER T M, Scanning, 32(4), 162-182, Wiley
Small data set analysis in surface metrology: an investigation using a single point incremental forming case study
POWERS B M, HAM M, WILKINSON M G, Scanning, 32(4), 199-211, Wiley
Evaluating the ability of different characterization parameters to describe the surface of fried food
MORENO M C, BOUCHON P, BROWN C A, Scanning, 32(4), 212-218, Wiley
On discovering relevant scales in surface roughness measurement - an evaluation of a band-pass method
BERGLUND J, AGUNWAMBA C, POWERS B, BROWN C A, ROSEN B G, Scanning, 32(4), 244-249, Wiley, [MountainsMap]
Impact of trace elements on biocompatibility of titanium scaffolds
SABETRASEKH R, TIAINEN H, RESELAND J E, [...], Biomedical Materials, 5(1), [SensoMap]
Prediction of the endurance limit taking account of the microgeometry after finishing milling
GUILLEMOT N, LARTIGUE C, BILLARDONET R, MAWUSSI B K, Int. J. Interactive Design and Manuf., 4(4), 239-249, [MountainsMap]
Characterization an in vitro cytocompatibility of an acid-etched titanium surface
REY DE CARVALHO D., PERRI DE CARVALHO P.S., MAGRO FILHO O., BIASOLI DE MELLO J D, BELOTI M M, ROSA A L, Brazilian Dental J., 21(1)
Comparing Different Methods to Assess Erosive Lesion Depths and Progression in vitro
STENHAGEN K R, HOVE L H, HOLME B, TAXT-LAMOLLE S, TVEIT A B, Caries Research, 44(6), [SensoMap]
Relative influence of surface topography and surface chemistry on cell response to bone materials. Part 1: Physico-chemical effects
PONCHE A, BEGERELLE M, ANSELME K, Proc. Inst. Mech. Eng. J. of Eng. Med. 1471-1486
Multiscale modal decomposition of form, undulation and roughness of surfaces
LE GOIC G, FAVRELIERE H, SAMPER S, FORMOSA F, 2nd Int. conf. on Surface Metrology, WPI, 22-37
On the dynamics of contact line motion during the wetting of rough surfaces and correlation with topographical surface parameters
KUBIAK K J, WILSON M C T, MATHIA T G, CARRAS S, 2nd Int. conf. on Surface Metrology, WPI, 90-101
Fibroblastic response and surface characterization of O2-plasma-treated thermoplastic polyetherurethane
SCHLICHT H, HAUGEN H J, SABETRASEKH R, WINTERMANTEL E, Biomedical Materials, 5(2), [SensoMap]
Calibration of the metrological characteristics of areal surface topography measuring instruments
GIUSCA C L, LEACH R K, 2nd Int. conf. on Surface Metrology, WPI, 145-153
Multiparameter surface description: case study in tape superfinishing
POWERS B M, O'HEARN J, 2nd Int. conf. on Surface Metrology, WPI, 154-161
Surface characterization and monitoring of surface changes after conservation treatment of silver gelatin photographic papers using confocal microscopy
RAVINES P, CHEN J J, WICHERN C M, Scanning, 32(3), 122-133
Pre-treatment of Zn surfaces for droplet corrosion studies
AZMAT N S, RALSTON K D, COLE I S, Surface and Coatings Tech. 205(3), 928-935, [Altimap]
Surface metrics: an alternative to patch metrics for the quantification of landscape structure
McGARIGAL K, TAGIL S, CUSHMAN A, Landscape Ecology, 24(3), 433-450, [MountainsMap]
Effect of molybdenum and chromium contents in sliding wear of high-chromium white cast iron: The relationship between microstructure and wear
SCANDIAN C, BOHER C, DE MELLO J D B, REZAI-ARIA F, Wear, 267(1-4), 401-408, [Altimap]
Optimization of the polishing procedure by using a robot assisted polishing equipment
FAURE-VIDAL A, Halmstad Univ. PhD Thesis, [MountainsMap]
"Flying Triangulation": A motion-robust optical 3D sensor principle
ETTL S, AROLD O, VOGT P, [...], 6th Int. Workshop on Adv. Optical metrology, [MountainsMap]
Titanium implant surface modification by cathodic reduction in hydrofluoric acid: Surface characterization and in vivo performance
LAMOLLE S F, MONJO M, LYNGSTADAAS S P, [...], J of Biomedical Materials Research, 88A(3), 581-588, [SensoMap]
Surface characterization and wear behavior of ion implanted NiTi shape memory alloy
LEVINTANT-ZAYONTS N, KUCHARSKI S, Vacuum, 83:1:S220-S223
Fatigue strength of chromium coadted elements and possibility of its improvement with ball peening
KORZYNSKI M, DZIERWA A, PACANA A, CWANEK J, Surface and Coating Technology, 5:615-620
The effect of hydrofluoric acid treatment of titanium surface on nanostructural and chemical changes and the growth of MC3T3-E1 cells
LAMOLLE S F, MONJO M, RUBERT M, [...], BioMaterials, 30(5), 736-742, [SensoMap]
[PDF] Flying triangulation - a new optical 3D sensor enabling the acquisition of surfaces by freehand motion
ETTL S, AROLD O, VOGT P, HYBL O, YANG Z, XIE W, HÄUSLER G, DGaO Proc., [MountainsMap]
[PDF] Measuring of surface structure and their analysis
MANAS K, SVOBODA E, DVORAKOVA R, 13th Int. Research/Expert conf. Trends in the dev. of Mach. and associated tech., [Talymap]
Second harmonic atomic force microscopy imaging of live and fixed mammalian cells
DULEBO A, PREINER J, KIENBERGER F, Ultramicroscopy, 109(8):1056-1060, [PicoImage]
[PDF] A 3D sensor for intraoral metrology
YANG Z, XIE W, AROLD O, HYBL O, VOGT P, ETTL S, HÄUSLER G, DGaO Proc., [MountainsMap]
The influence of substrate surface roughness on microstrip transmission line loss using conventional analyses and length-scale fractal analysis
VINCENT T, POWERS B, BAR-ON I, Surf. Interface Anal., 42(1), 21-35
Combined use of scratch tests and CLA profilometry to characterize polyester powder coatings
BARLETTA M, Surface and Coatings Technology, 203(13), 1863-1878, [Talymap]
Acetylcholinesterase as an amyloid enhancing factor in PrP82-146 aggregation process
PERA M, MARTINEZ-OTERO A, COLOMBO L, SALMONA M, RUIZ-MOLINA D, BADIA A, CLOS M V, Molecular and cellular neuroscience, 40(2), 217-224, [MountainsMap]
Quantification of the cold worked material inside the deep honing grooves on cylinder liner surfaces and its effect on wear
DIMKOVSKI Z, ANDERBERG C, ROSEN B G, OHLSSON R, THOMAS T R, Wear, 267, 2235-2242, [MountainsMap]
The evolution of surface topography of injection cams
CABANETTES F, CLARET-TOURNIER J, MOHLIN J, NILSSON P H, ROSEN B G, Wear, 266, 570-573, [MountainsMap]
Influence de la topographie de surface induite par le fraisage sur la durée de vie en fatigue d'un acier 25MnCrSiVB6
GUILLEMOT N, PESSARD E, BILLARDON R, MAWUSSI B K, LARTIGUE C, 19ème Congrès Français de Mécanique, Marseille, [MountainsMap]
Diamond-like carbon coatings enhance scratch resistance of bearing surfaces for use in joint arthroplasty: Hard substrates outperform soft
ROY M.E., WHITESIDE L.A., KATERBERG B.J., J. Biomedical Mat. Res. B, Appl. Biomaterials, 89B(2), 527-535, [MountainsMap]
Uncertainty evaluation for a new traceable areal surface texture measuring instrument
GIUSCA C.L., FORBES A.B., LEACH R.K., 12th Int. conf. Metrology and Properties of Engineering Surfaces, Rzeszow, 37-41
Analysis of topography of engineering surfaces by white light scanning interferometry
LUKIANOWICZ C., TOMKOWSKI R., 12th Int. conf. Metrology and Properties of Engineering Surfaces, Rzeszow 63-67
Uncertainties and optimized sampling in surface roughness characterization
ROSEN B.G., GARNIER J., 12th Int. conf. Metrology and Properties of Engineering Surfaces, Rzeszow, 97-104
The use of surface segmentation methods to characterize laser zone surface structure on hard disc drives
BLUNT L., XIAO S., 12th Int. conf. Metrology and Properties of Engineering Surfaces, Rzeszow, 117-124
Characterization of 3D surface topography in 5 axis milling
QUINSAT Y., LAVERNHE S., LARTIGUE C., 12th Int. conf. Metrology and Properties of Engineering Surfaces, Rzeszow, 127-131
A new method of investigating crater and flash made by individual discharge using scanning profilometers
NOWICKI B., DMOWSKA A., PODOLAK-LEJTAS A., 12th Int. conf. Metrology and Properties of Engineering Surfaces, Rzeszow, 139-145
The investigation of correlation of surface roughness and waviness of sealing rings
WIZNER M., JAKUBIEC W., STARCZAK M., 12th Int. conf. Metrology and Properties of Engineering Surfaces, Rzeszow, 237-241
The influence of the surface geometric structure on the functionality of implants
NIEMCZEWSKA-WOJCIK M., 12th Int. conf. Metrology and Properties of Engineering Surfaces, Rzeszow, 259-263
The surface texture analysis after sliding burnishing with cylindrical elements
SWIRAD S., 12th Int. conf. Metrology and Properties of Engineering Surfaces, Rzeszow, 275-280
Description of multi-process surface topography
PAWLUS P., GRABON W., 12th Int. conf. Metrology and Properties of Engineering Surfaces, Rzeszow, 301-306
Polished injection moulds and surface defects influence on the quality of plastic components
REBEGGIANI S., ROSEN B.G., SANDBERG A., 12th Int. conf. Metrology and Properties of Engineering Surfaces, Rzeszow, 396-397, [MountainsMap]
Experimental friction evaluation of cylinder liner/piston ring contact: method and approach
JOHANSSON S., NILSSON P.H., OHLSSON R., ROSEN B.G., Adv. in Boundary lubrication, Seville
Adhesion in polypropylene/aluminum laminates made by extrusion coating
DEVISME S, HAUDIN J-M, AGASSANT J-F, COMBARIEU R, RAULINE D, CHOPINEZ F, J of Applied Polymer Science, 112(5), 2609-2624, [Altimap]
Synchrotron X-ray Microtomography: A New Tool to Characterize the Interaction Between Paper and Toner
VERNHES P, ROLLAND DU ROSCOAT S, BLAYO A, PINEAUX B, THIBAULT X, BLOCK J-F, J of Imaging Sci. and Tech., 52(1), 10502-1-6, [Altimap]
Evaluation of a robot assisted polishing equipment
REBEGGIANI S, ROSEN B-G, 2nd Swedish Prod. Symp., [MountainsMap]
Relationships between process, microstructure and properties of molded zirconia micro specimens
RÖGNER J., OKOLO B., KURZENHÄUSER S., MÜLLER M., BAUER W., RITZHAUPT-KLEISSL H-J., KERSCHERET E., SCHULZE V., Microsystem Tech. 14(12), 1831-1837, [MountainsMap]
[PDF] Conservation and paper roughness of art artifacts
CHOPRA J., YADAV A., [MountainsMap]
Quantification of blechmantel effect on wear of cylinder bore microtopography
DIMKOVSKI Z., ANDERBERG C., ROSEN B.G., OHLSSON R., THOMAS T.R., Proc. 13th Nordic Symposium on Tribology, Nordtrib
Optical chromatic confocal probes
JORDAN H.J., XII Int. Colloquium on Surfaces, Chemnitz, 200-209, [MountainsMap]
Application of scanning profilométrie for investigation discharge traces generated during electro-discharge machining and electro-discharge alloying
NOWICKI B., DMOWSKA A., PODOLAK A., XII Int. Colloquium on Surfaces, Chemnitz, 246-257
Atomically flat surface : the key issue for solution-derived epitaxial multilayers
COLL M., POMAR A., PUIG T., OBRADORS X., Applied Physics Express 1
On the use of CrN/Cr and CrN interlayers in hot filament chemical vapour deposition (HF-CVD) of diamond films onto WC-Co substrates
POLINI R, BARLETTA M, Diamond and Related Materials, 17(3), 325-335, [Talymap]
Tomographic phase microscopy
CHOI W., FANG-YEN C., OH S., LUE N., DASARI R.R., FELD M.S., BADIZADEGAN K., Imaging & Microscopy, 10(1), 48-50, [MountainsMap]
On the combined use of scratch tests and CLA profilometry for the characterization of polyester powder coatings: Influence of scratch load and speed
BARLETTA M, GISARIO A, LUSVARGHI L, BOLELLI G, RUBINO G, Applied Surface Science, 254(22), 7198-7214, [Talymap]
Real mechanical surface versus electro-magnetic surface
DIETZSCH M., GRÖGER S., GERLACH M., XII Int. Colloquium on Surfaces, Chemnitz, 1-14
A new envelope system for the evaluation of functional surfaces
DIETZSCH M., GRÖGER S., GERLACH M., XII Int. Colloquium on Surfaces, Chemnitz, 51-59
Wear process of textured ring examined by measurement of surface topography
GALDA L., PAWLUS P., DZIERWA A., XII Int. Colloquium on Surfaces, Chemnitz, 78-87
Functional oriented assessment and tolerancing of surface characteristics utilizing examples from the automotive industry
BECK C., PLEUL R., HÖRNING M., LEMKE H.W., XII Int. Colloquium on Surfaces, Chemnitz, 88-101
Report on the results of an intercomparison using stylus-type and non-contacting surface measuring instruments
RUBERT P., XII Int. Colloquium on Surfaces, Chemnitz, 135-142
The errors of measurements of two-process surfaces
PAWLUS P., GRABON W., MICHALSKI J., XII Int. Colloquium on Surfaces, Chemnitz, 286-295
Deposition of Organosilicon-Based Anticorrosion Layers on Galvanized Steel by Atmospheric Pressure Dielectric Barrier Discharge Plasma
BARDON J, BOUR J, AUBRIET H, RUCH D, [...], Plasma Processes and Polymers, 4(1), S445-S449
New developments in through-mask electrochemical micromachining of titanium
KERN P, VEH J, MICHLER J, J of MicroMech. and MicroEng., 17, 1168, [Altimap]
Optical and contact nondestructive measurement of the laser remelting layers
CHMELICKOVA H, LAPSANSKA H, HIKLOVA H, HAVELKOVA M, MEDLIN R, BENES P, Proc SPIE 6616, Optical Meas. Systems for Industrial Inspection, [Talymap]
Aluminum laser welding optimization
CMELICKOVA H, HALENKA V, LAPSANSKA H, HAVELKOVA M, Proc SPIE 6609, 15th Czech-Polish-Slovak Conf. on Wave and Quantum Aspects of Comtemporary Optics, [Talymap]
Biomolecular papain thin films growth by laser techniques
GYORGY E., SANTISO J., FIGUERAS A., MIHAILESCU N, J. of Materials Sci., Mat. in Medicine, 18(8), 1643-1647, [MountainsMap]
Epoxy-based thermosetting powder coatings: Surface appearance, scratch adhesion and wear resistance
BARLETTA M, LUSVARGHI L, PIGHETTI MANTINI F, RUBINO G, Surface and Coatings Technology, 201(16-17), 7479-7504, [Talymap]
Phase transformation, roughness and microhardness of artificially aged yttria- and magnesia-stabilized zirconia femoral heads
ROY M.E., WHITESIDE L.A., KATERBERG B.J., STEIGER J.A., J. of Biomedical material research, 83A, 1096-1102, [MountainsMap]
Differentiation of corrosion inhibitors for the prevention of localized corrosion
CALEB CLARK J., BUI T.D., HARRIS G.D., CLOKE K.M., Corrosion, Nashville, NACE International, [MountainsMap]
Effect of Surface Morphology on Crack Growth at a Sol-Gel Reinforced Epoxy/Aluminum Interface
LIU J, CHAUDHURY M K, BERRY D H, SEEBERGH J E, OSBORNE J H, J of adhesion, 82(5)
3D parameters and new filtration techniques
BLATEYRON F., Proc. JSPE Spring meeting, Tokyo, 21-27, [MountainsMap]
Etude des profils de contraintes sur acier par diffraction des rayons X
MEUNIER C., VIVES S., ROMAN A., NARDIN P.
Importance of substrate roughness for in vitro sun protection assessment
FERRERO L., PISSAVINI M., DEHAIS A., MARGUERIE S., ZASTROW L., IFSCC Mag, 9(2), [Altimap]
Influence of the stereometric and morphometric structure of composite coatings on the hydrogen evolution process
CYBO J, MASZYBROCKA J, BUDNIOK A, NAPLOSZEK-BILNIK I, Materials Characterization, 56(4-5), 310-317, [Talymap]
Splat morphology and spreading behavior due to oblique impact of droplets onto substrates in plasma spray coating process
KANG C.W., NG H.W., Surface and coating technology, 200(18-19), 5462-5477, [MountainsMap]
Assessment of surface topography of abrasive sheets by light scattering and self shadowing methods
LUKIANOWICZ C., IAQUINTA J., Archives of civil and mechanical engineering, V:2:71-84
Are 3D surface standard parameters discriminant for papers
MERCIER C., BLOCH J.F., 10th Int. conf. Metrology and Properties of Engineering Surfaces, St Etienne, 165-170
Tribological properties of PVD tool coating in forming operations of steel sheets
CLARYSSE F., LAUWERENS W., VERMEULEN M., 10th Int. conf. Metrology and Properties of Engineering Surfaces, St Etienne, 165-170
The arithmetic roughness, the root-mean-square roughness and the norm L?
BIGERELLE M., COOREVITS T., HENNEBELLE F., 10th Int. conf. Metrology and Properties of Engineering Surfaces, St Etienne, 291-297
The effect of stylus flight on the surface topography of non-symmetrical ordinate distribution measurement
SMIESZEK M., PAWLUS P., GORKA S., 10th Int. conf. Metrology and Properties of Engineering Surfaces, St Etienne, 349-355
The influence of surface topography on emissive properties
WIECZOROWSKI M., ROZANSKI L., 10th Int. conf. Metrology and Properties of Engineering Surfaces, St Etienne, 471-478
Recent advances in traceable nanoscale dimension and force metrology in the UK
LEACH R., CHETWYND D., BLUNT L., HAYCOCKS J., HARIS P., JACKSON K., OLDFIELD S., REILLY S., Proc. 7th ISMTII, Huddersfield, 12-23
Characterisation of surface roughness for ultra-precision freeform surfaces
LI H., CHEUNG C.F., LEE W.B., TO S., JIANG X.Q., Proc. 7th ISMTII, Huddersfield, 211-214
A comparison of surface metrology techniques
CONROY M., ARMSTRONG J., Proc. 7th ISMTII, Huddersfield, 351-357
Surface integrity of provisional resin materials
ABOUELATTA O.B., EL-BEDIWI A., SAKRANA A., JIANG X.Q., BLUNT L., Proc. 7th ISMTII, Huddersfield, 536-545
Application of image segmentation to motifs evaluation on 2D profiles
BLATEYRON F., ADAM M., XI Int. Colloquium on Surfaces, Chemnitz, I. 56-64
Optical profilometry as a non-destructive technique to quantify engraving on medieval brass astrolabes
NEWBURY B.D., NOTIS M.R., MRS Proc, 852, 177-182, [MountainsMap]
Applications and limits of optical metrology by the confocal multipinhole technique
BRODMANN R., WARRENDER T., WEBER M., XI Int. Colloquium on Surfaces, Chemnitz, I. 155-162
Method for selecting function-relevant surface characteristics
BECK C., PLEUL R., XI Int. Colloquium on Surfaces, Chemnitz, I. 258-267
The use of standard specimens to check stylus tip size in surface measuring instruments
RUBERT P., FRENZEL C., XI Int. Colloquium on Surfaces, Chemnitz, II. 129-138
Quantification de l'endommagement / usure de revêtements de sol polymères durant le test lisson par une approche topographique
BUCHHEIT O., BONNEL DE LONGCHAMP N., VON STEB J., Progrès en tribologie, Nancy, France, [MountainsMap]
Caractérisation mécanique du 3è corps par nano-indentation et AFM : application au transfert graphite/acier
STEMPFLE P., VON STEB J., Progrès en tribologie, Nancy, France, [MountainsMap]
Evolución de la rugosidad superficial de una chapa de acero recubierta sometida a diferentes deformaciones
TRAVERSA P., ENEDETTI P., ZIEGLER D., IURMAN L., LUCAIOLI A., BERGE G., INSAUSTI J., J. SAM / Conamet, Simposio Materia, 715-717
Topography of the flank wear surface
J of Materials Processing Technology, 120(1-3), 243-248, [Talymap]
Relationship between tool flank wear area and component forces in single point turning
SUMIT KANTI S., MINGYUAN C., J. of Material Processing Tech. 128:210-215, [Talymap]
Quality assurance of HARMS and MOEMS surface structures using confocal white light microscopy
JORDAN H-J, BRODMANN R, GRIGAT M, VALENTIN J, Proc SPIE 4440 Lithographic and Micromachining Techniques for Optical component fabrication., [MountainsMap]
Aesthetic surfaces created with the Electron Beam texturing technology
CLARYSSE F, VERMEULEN M, GIJS J, VAN DE VELDE F, VRANKEN P, [MountainsMap]
Considerations on 2D measurement of sheet roughness when applying SEP1940 / EN10049
VERMEULEN M., SCHEERS J., 8th Int. conf. Metrology and Properties of Engineering Surfaces
Robust filtering applied to sheet metal surfaces
VERMEULEN M., SCHEERS J., X int. Colloquium on Surfaces, Chemnitz, 184-195
An experimental model of tibial counterface polyethylene wear in mobile bearing knees: The influence of design and kinematics
JONES V.C., BARTON D.C., FITZPATRICK D.P., AUGER D.D., STONE M.H., FISHER J., Bio-Medical, Materials and Engineering 9:189-196, [Talymap]
More publications:
Partner products based on the Mountains Technology, cited here are: